By the time a part reaches the shop floor, most of its cost has already been decided. The material, the number of components, the tolerances, and the process it’s built for were all set on a drawing, often weeks or months earlier. A fabricator can work efficiently with whatever print it receives, but it can’t undo a design choice that makes a part expensive to produce.

That’s the core idea behind Design for Manufacturability (DFM): designing parts with the realities of production in mind from the start. And the most effective way to practice DFM is simple. Bring your fabricator into the conversation before the design is final.

Why Early Collaboration Pays Off

Design engineers are experts in function. They know what a part needs to do, what loads it carries, and how it fits into an assembly. Fabricators are experts in how parts actually get made: how a given alloy behaves under a press, what tolerances a process can hold consistently, and where a design will create scrap, extra setups, or secondary operations.

When those two perspectives meet late, usually after a print has been released for quote, the options are limited. Changes mean revised drawings, new approvals, and sometimes re-qualification. When they meet early, a small adjustment on paper can remove cost from every part you’ll ever produce.

Here are four areas where early input makes the biggest difference.

1. Material Selection

Material often represents a large share of a part’s cost, and it’s one of the easiest places to overspecify. A few questions worth asking before you lock in a material:

Is the grade driven by a real requirement?

Specifying a premium alloy “to be safe” can add cost without adding value. A fabricator can help confirm whether a more common grade will meet your strength, corrosion, or appearance needs.

Is the thickness standard?

Non-standard gauges can mean longer lead times, minimum buys, and higher prices. Small thickness adjustments sometimes open up readily available stock.

How will the material form?

Some materials work-harden, spring back, or crack under certain forming operations. A material that looks ideal on a spec sheet may be difficult to spin, draw, or bend to your geometry, which leads to higher scrap rates or extra annealing steps.

How efficiently will it nest?

Part dimensions relative to standard sheet sizes affect how much material ends up as scrap. A fabricator can flag when a minor dimensional change would significantly improve yield.

2. Part Consolidation

Every component in an assembly carries its own cost: material, cutting, forming, handling, inspection, and inventory. Then there’s the cost of joining them together.

Before a design is finalized, it’s worth asking whether multiple pieces could become one. Processes like metal spinning and stamping can often produce shapes in a single piece that would otherwise be built from several parts. Fewer parts typically means fewer operations, fewer joints that could fail, simpler inspection, and a more consistent finished product.

This is far easier to address at the concept stage than after the assembly has been designed around separate components and validated. Once mating parts, fasteners, and fixtures are built around a multi-piece design, consolidating becomes a redesign rather than a simple tweak.

3. Tolerance Choices

Tolerances are one of the most common sources of hidden cost. Tighter tolerances can require slower processes, additional operations, more frequent inspection, and higher reject rates, and those costs apply to every single part.
A few practical guidelines:

  1. Tighten only where function demands it. Mating surfaces and critical features may need tight control. Many other features don’t.
  2. Avoid blanket title-block tolerances that are tighter than necessary. A default tolerance applied across the entire drawing can unintentionally make every feature expensive.
  3. Match tolerances to the process. Each manufacturing method has a range it holds reliably. Specifying tighter than that range often forces secondary machining or extra inspection steps.

A fabricator can tell you what a process holds comfortably and where your tolerances push into costly territory, before those numbers are baked into a released drawing.

4. Process Selection

The same part can often be made several ways, and the right choice depends heavily on geometry, material, and volume.

For example, metal spinning is often well-suited to round, symmetrical parts and lower-to-mid volumes because tooling is relatively simple. Stamping can deliver excellent per-part economics at higher volumes, but requires a larger upfront tooling investment. Laser cutting and fabrication offer flexibility for complex flat patterns and changing designs, and 5-axis laser cutting can trim formed parts without dedicated fixtures for every operation.

Designing a part without a process in mind can result in features that suit one method poorly, such as bend radii that are too tight, holes placed too close to an edge or bend, or draw depths that exceed what the material can handle in one operation. Choosing the process early lets you design features that the process can produce efficiently, and it gives you a realistic picture of tooling costs and lead times as volume grows.

Prototype Before You Commit

Even with careful DFM review, some questions are best answered with a physical part. Prototyping lets you test fit, function, and manufacturability before investing in production tooling. Each round of testing is an opportunity to refine the design while changes are still inexpensive.

The key is working with a partner who can carry that prototype through to full production, so lessons learned during development carry straight into the production process instead of being lost in a handoff.

Treat Your Fabricator as an Engineering Resource

Many engineers treat fabricators as vendors: send a finished print, get a quote, receive parts. That approach works, but it leaves value on the table. A fabricator with deep process knowledge can be one of the most useful voices in the design review.

At Tallmadge Spinning & Metal, our engineering team reviews customer designs and recommends changes when we see an opportunity to make a part stronger, better, or more cost-effective to produce. We work with most flat pattern CAD files and can support certification efforts, including analysis to help with proof of concept.

Through our research and development services, we produce prototypes for testing and refinement, working through as many rounds as it takes, then move the finished design into production in our own shop. With metal spinning, stamping, welding, fabrication, and laser cutting under one roof, we can recommend the process that fits your part rather than the one that fits our equipment list.

And because we’re a family-owned business that has been manufacturing metal parts since 1947, you get direct access to experienced people. One phone call is usually all it takes.

Bring Us In Early

The best time to reduce manufacturing cost is before the first part is made. If you have a design in development, even an early concept, contact Tallmadge Spinning & Metal to talk through materials, tolerances, and process options with our team. A conversation now can save a redesign later.

Mechanic Worker working on machine in metal plant heavy industry
Engineering Laser Cutting Metal Fabrication Metal Spinning Metal Stamping Products Quality Steel Types of Steel Welding
Page 1 Created with Sketch.

Request a Quote to Get Started

From research and development to final production, Tallmadge Spinning & Metal is your partner for cost-effective and superior metal products. Request a quote today to get started.

REQUEST A QUOTE TODAY TO GET STARTED